Proper Breaking Force of Breaking Hammer

The large inner diameter grinding machine for the breaker processes the oil cylinder and the inner side of the valve as finished

 products at one time to ensure the centrality and improve the accuracy. In addition to the special super processing and inner

 diameter grinding operations, the surface roughness and product finish are improved. The following breaker manufacturers will

 take you to understand the proper breakdown force of the breaker:
   For effective crushing, the breaking hammer should apply a suitable penetration force. If the penetration force is insufficient

, the hammering energy of the piston will not be able to effectively crush the rock; thus the reaction force of the hammering

 force will be transmitted to the breaker body, the boom of the excavator/loader, etc., thereby damaging these components.
  On the other hand, when the boom of the excavator/loader is lifted, if the penetration force is too large and the crushing

 operation is performed, the machine may suddenly tilt at the moment of crushing the rock, and the crushing hammer is violent,

 and the crushing hammer violently hits the stone to cause crushing. The hammer is damaged, and the vibration will be transmitted

 to the crawler and wheels of the excavator if the striking operation is performed under this condition. It should be avoided to 

operate under this condition.